4: Configuration Using Web Manager
WiPort Embedded Wireless Device Server User Guide
44
Serial Channel 2 Status
LED
Indicates channel 2 status.
Diagnostics LED
Indicates errors and configurations.
Reset to Defaults
(Wireless)
Asserting during bootup for at least seven seconds resets the
configuration to factory defaults. Used when network access is
impossible because of improper configuration.
RS-485 Select
Selects between RS-232 and RS-485 line drivers.
RS485 2-Wire
Selects 2-wire line drivers. Usable as a half/full duplex
selector.
RS485 4-Wire
Selects 4-wire line drivers.
Reset to Defaults
(Ethernet)
Asserting during bootup for at least seven seconds resets the
configuration to factory defaults. In addition, the wired network
becomes the default interface. Used when network access is
impossible because of improper configuration.
3. When you are finished, click the
OK
button.
4. On the main menu, click
Apply Settings
.
Apply Settings
1. To save and apply the configuration changes to the device server, click the
Apply Settings
button.
Note:
Clicking
OK
on each page does not change the configuration on the
device. Clicking the
OK
button tells the MatchPort what changes to use; the
Apply
Apply Defaults
1. Click the
Apply Defaults
button to set the devic server back to the default
on page
2. Click
Yes
to set factory settings, or click
No
to cancel.