WiPort Embedded Wireless Device Server User Guide
18
4: Using DeviceInstaller
This chapter covers the steps for getting the WiPort device server online and viewing its
current configuration.
Note:
DeviceInstaller is a free utility program provided by Lantronix that discovers,
configures, upgrades, and manages Lantronix Device Servers. It can be downloaded
from the Lantronix website at www.lantronix.com/support/downloads.
For instructions on using DeviceInstaller to configure the IP address and related
settings or for more advanced features, see the DeviceInstaller Online Help.
Installing DeviceInstaller
To install DeviceInstaller:
1. Download the latest version of DeviceInstaller from
http://www.lantronix.com/downloads
2. Run the executable to start the installation process.
3. Respond to the installation wizard prompts. (If prompted to select an installation type,
select
Typical
).
Assigning an IP Address
The unit’s IP address must be configured before it can work correctly on a network. You have
several options for assigning an IP to your unit. We recommend that you manually assign the
IP address over the network using DeviceInstaller.
Note
:
To use a serial connection instead of an Ethernet connection to
configure the device, see
5 Configuration via Telnet or Serial Port (Setup
Mode)
on page
The unit’s IP address is normally set to 0.0.0.0 at the factory. The hardware address is on the
product label. The unit is DHCP enabled as the default.
To assign an IP address manually:
1. Click
Start
All Programs
Lantronix
DeviceInstaller 4.4
DeviceInstaller
. If your
PC has more than one network adapter, a message displays. Select an adapter and click
OK
.
Note:
If the unit already has an IP address (e.g., DHCP has assigned an IP
address), click the
Search
icon and select the unit from the list of Lantronix
device servers on the local network.
2. Click the
Assign IP
icon .
3. If prompted, enter the hardware address (on the product label) and click
Next
.
4. Select
Assign a specific IP address
and click
Next
.
