4: Configuration Using Web Manager
WiPort Embedded Wireless Device Server User Guide
39
recipient(s).
Priority
The priority level for the e-mail.
Min. Notification Interval
The minimum time allowed between individual triggers. If a
trigger event occurs within the minimum interval since the last
trigger, it is ignored.
Re-notification Interval
Indicates the time interval in which a new email message is
sent to the recipient(s) when a single trigger event remains
active.
3. When you are finished, click the
OK
button.
4. On the main menu, click
Apply Settings
.
WLAN Configuration
Without adequate protection, a wireless LAN is susceptible to access by
unauthorized users.
Note:
Due to regulations, the country-specific setting has been removed from the
setup menu and Web Manager. However, we provide a separate utility for changing
the
Country/Zone
setting. The utility is called SetZone and is included in the WiPort
package. It is also available for download from the Lantronix web site.
The syntax is SetZone <IP address> [<zone abbreviation>]
Leaving the zone blank causes the utility to report the current setting only. Following
are valid zone abbreviations. These settings are consistent with IEEE802.11b/g
zones:
US=United States CA=Canada
FR=France
SP=Spain
JP=Japan
OT=Others, such as Europe (excluding
France), Asia, Africa, and Australia
To configure the WiPort’s WLAN settings:
1. Select
WLAN
from the main menu to open the WLAN Settings window.
