6: Configuration via Serial Mode or Telnet Port
WiPort Embedded Wireless Device Server User Guide
64
Recipient 2
Enter the full email address of the trigger email recipient. The current value is
displayed in parentheses.
Recipient 2 () ? _
Trigger 1
A trigger event occurs when the unit receives the specified trigger input because of a
specified combination of conditions on the configurable pins.
Enable serial trigger input (N) ?
Trigger input1 [A/I/X] (X) ?
Trigger input1 [A/I/X] (X) ?
Trigger input1 [A/I/X] (X) ?
Message () ?
Priority (L) ?
Minimum notification interval (1 s) ?
Re-notification interval (0 s) ?
Set the configurable pins to
A
= Active,
I
= Inactive, or
X
= Don’t Care. Active can
mean Active Low or Active High. If the configurable pins are all set to
X
(Don’t Care),
then they are disabled. If both the serial sequence and the configurable pins are
disabled, the trigger is disabled.
To change the configurable pins’ settings, send setup records to Port 77FE.
The
Message
is the subject line of the trigger event email to the specified
recipient(s).
The
Priority
is the priority level for the trigger even email. Enter
L
for normal priority
or
H
for high priority.
The
Minimum notification interval
is the minimum time allowed between individual
triggers. If a trigger event occurs within the minimum interval since the last trigger, it
is ignored.
The
Re-notification interval
indicates the time interval in which a new email
message is sent to the recipient(s) when a single trigger event remains active.
Trigger 2
Refer to
for details on completing these fields.
Note:
Each trigger is independent of the others. Each condition within an
individual trigger must be met before the unit will send the email.
Trigger 3
Refer to
for details on completing these fields.
Note:
Each trigger is independent of the others. Each condition within an
individual trigger must be met before the unit will send the email.
