Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
62
of
272
TX Delay : 3339
TX Reinit : 2
SISPM1040-582-LRT(config)#
Command
:
logging
Description
:
Configure System logging messages.
Syntax
:
logging
host { <ipv4_addr> | <domain_name> }
logging
on
logging
port <port_no>
Parameters
:
host
Syslog host
on
Enable Switch logging host mode
port
Service port number
<domain_name> The domain name is to provide a mechanism for naming resources on the Internet.
A complete domain name consists of one or more subdomain names separated by dots.
<ipv4_ucast>
The IPv4 address of the log server.
<ipv6_ucast>
The IPv6 address of the log server.
<1-65535>
Port number
Example
:
SISPM1040-582-LRT(config)#
logging host 192.168.1.40
SISPM1040-582-LRT(config)#
logging port 654
SISPM1040-582-LRT(config)#
Command
:
loop-protect
Description
:
Loop protection configuration.
Syntax
:
loop
-protect
loop
-protect shutdown-time <t>
loop
-protect transmit-time <t>
Parameters
:
shutdown-time
Loop protection shutdown time interval
transmit-time
Loop protection transmit time interval
<0-604800>
Shutdown time in seconds
<1-10>
Transmit time in seconds
<cr>
Example
:
SISPM1040-582-LRT(config)#
loop-protect
SISPM1040-582-LRT(config)#
loop-protect shutdown-time 50000
SISPM1040-582-LRT(config)#
loop-protect transmit-time 5
SISPM1040-582-LRT(config)#
