Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
10
of
272
Example 3
: Press the Tab key to display available commands in table format.
SISPM1040-582-LRT#
show
<tab>
aaa access access-list
aggregation always-on-poe clock
command-history-log dot1x eps
erps evc event
green-ethernet history interface
ip ipmc ipv6
lacp line link-oam
lldp logging loop-protect
mac map-api-key mep
monitor mrp mvr
ntp platform poe
port-security privilege process
ptp pvlan qos
radius-server rapid-ring rmon
running-config sflow smtp
snmp spanning-tree switchport
system tacacs-server terminal
udld upnp user-privilege
users version vlan
voice web
SISPM1040-582-LRT#
Command
:
CableDiag
Description
: Run Cable Diagnostic test on copper ports.
Syntax
:
CableDiag
interface <port_type> <port_type_id>
Parameters
: interface
Interface keyword
GigabitEthernet
1 Gigabit Ethernet Port
<port_type_id>
Port ID in 1/1-8
Example
:
SISPM1040-582-LRT#
CableDiag interface GigabitEthernet 1/3
Starting Cable Diagnostic - Please wait
Interface Link Status Test Result Length
---------------------- ------------- ------------- -------------
GigabitEthernet 1/3 Link Down detect error or check cable length is between 7-120 meters
SISPM1040-582-LRT#
CableDiag interface GigabitEthernet 1/8
Starting Cable Diagnostic - Please wait
Interface Link Status Test Result Length
---------------------- ------------- ------------- -------------
GigabitEthernet 1/8 1G detect error or check cable length is between 7-120 meters
SISPM1040-582-LRT#
CableDiag interface GigabitEthernet 1/7
Starting Cable Diagnostic - Please wait
Interface Link Status Test Result Length
---------------------- ------------- ------------- -------------
GigabitEthernet 1/7 Link Down Abnormal 3(m)
SISPM1040-582-LRT#
Messages
:
% No such interface: GigabitEthernet 1/9
displays if you enter the command on a fiber port.
