Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
60
of
272
Command
:
lldp
Description
:
LLDP and LLDP-MED configuration commands.
Syntax
:
lldp
holdtime <val>
lldp
med datum { wgs84 | nad83-navd88 | nad83-mllw }
lldp
med fast <v_1_to_10>
lldp
med location-tlv altitude { meters | floors } <v_word11>
lldp
med location-tlv civic-addr { { country <country> } | { state | county | city | district | block | street | leading-
street-direction | trailing-street-suffix | street-suffix | house-no | house-no-suffix | landmark | additional-info |
name | zip-code | building | apartment | floor | room-number | place-type | postal-community-name | p-o-box
| additional-code } <v_line> }
lldp
med location-tlv elin-addr <v_word25>
lldp
med location-tlv latitude { north | south } <v_word8>
lldp
med location-tlv longitude { west | east } <v_word9>
lldp
med media-vlan-policy <policy_index> { voice | voice-signaling | guest-voice-signaling | guest-voice |
softphone-voice | video-conferencing | streaming-video | video-signaling } { untagged | tagged <v_vlan_id> [ l2-
priority <v_0_to_7>] } [ dscp <v_0_to_63> ]
lldp
reinit <val>
lldp
timer <val>
lldp
transmission-delay <val>
Parameters
:
holdtime
Sets LLDP hold time (The neighbor switch will discarded the LLDP information after "hold time"
multiplied with "timer" seconds ).
med Media Endpoint Discovery.
reinit LLDP tx reinitialization delay in seconds.
timer Sets LLDP TX interval (The time between each LLDP frame transmitted in seconds).
transmission-delay Sets LLDP transmission-delay (the amount of time that the transmission of LLDP frames
will delayed after LLDP configuration has changed) in seconds.)
<2-10>
2-10 seconds.
datum Datum (geodetic system) type.
fast Number of times to repeat LLDP frame transmission at fast start.
location-tlv LLDP-MED Location Type Length Value parameter.
media-vlan-policy Used to create a policy, which can be assigned to an interface.
nad83-mllw Mean lower low water datum 1983
nad83-navd88 North American vertical datum 1983
wgs84 World Geodetic System 1984
<1-10>
fast
altitude Altitude parameter.
civic-addr Civic address information and postal information. The total number of characters for the
combined civic address information must not exceed 250 characters. Note: 1) A non empty civic
address location will use 2 extra characters in addtion to the civic address location text. 2) The 2
letter country code is not part of the 250 characters limitation.
elin-addr Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as used
during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. This format
consists of a numerical digit string, corresponding to the ELIN to be used for emergency calling.
Emergency Location Identification Number, (e.g. E911 and others), such as defined by TIA or
NENA.
