Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
31
of
272
Command
:
aggregation
Description
:
Configure Aggregation mode.
Syntax
:
aggregation
mode { [ smac ] [ dmac ] [ ip ] [ port ] }*1
Parameters
: mode Traffic distribution mode
dmac Destination MAC affects the distribution
ip IP address affects the distribution
port IP port affects the distribution
smac Source MAC affects the distribution
Example
:
SISPM1040-582-LRT(config)#
aggregation mode ip port dmac smac
SISPM1040-582-LRT(config)#
Command
:
always-on-poe
Description
:
Enable Always-on PoE. When enabled, during a switch warm restart, the switch will continue
supplying PoE power to the PDs (
FW VB7.10.2658 and above
).
Syntax
:
always-on-poe
<cr>
Parameters
: | Output modifiers
<cr>
Example
:
SISPM1040-582-LRT(config)#
always-on-poe
Always-on PoE Status : Enable
SISPM1040-582-LRT(config)#
Command
:
banner
Description
:
Define a login banner.
Syntax
:
banner
[ motd ] <banner>
banner
exec <banner>
banner
login <banner>
Parameters
: <line> c banner-text c, where 'c' is a delimiting character
exec Set EXEC process creation banner
login Set login banner
motd Set Message of the Day banner
Example
:
banner exec LINE
Enter TEXT message. End with the character 'L'.
L
