Lantronix SISPM1040-582-LRT, Manual, Page: 225 / 272

Lantronix SISPM1040-582-LRT CLI Reference
33757 Rev. J https://www.lantronix.com/ Page 225 of 272
Command
:
mvr
Description : Configure Multicast VLAN Registration for an interface.
Syntax : mvr immediate-leave
mvr name <mvr_name> type { source | receiver }
mvr vlan <v_vlan_list> type { source | receiver }
Parameters : immediate-leave Immediate leave configuration
name MVR multicast name
vlan MVR multicast vlan
<word16> MVR multicast VLAN name
type MVR port role configuration
receiver MVR receiver port
source MVR source port
<vlan_list> MVR multicast VLAN list
Example :
SISPM1040-582-LRT(config-if)#
mvr immediate-leave
SISPM1040-582-LRT(config-if)#
mvr name MvrVID-1 type receiver
SISPM1040-582-LRT(config-if)# mvr vlan 10 type source
SISPM1040-582-LRT(config-if)#
Messages :
% Invalid MVR VLAN MvrVID-1.
% Failed to set MVR port role.
Command : no
Description : Negate a command or set its defaults.
Syntax :
no
<command>
Parameters :
access-list aggregation debug description dot1x
duplex excessive-restart flowcontrol frame-length-check
green-ethernet gvrp ip ipv6 lacp
link-oam lldp loop-protect mac mtu
mvr poe port-security ptp pvlan
qos rmon sflow shutdown spanning-tree
speed switchport udld
Example :
SISPM1040-582-LRT(config-if)# no sflow
SISPM1040-582-LRT(config-if)#
no mtu
SISPM1040-582-LRT(config-if)#