Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
176
of
272
Command
:
platform
Description
:
Show platform debug and phy configuration.
Note
: Debug commands are only for use by, or at
the direction of Technical Support.
Syntax
:
show
platform debug
show
platform phy [ interface ( <port_type> [ <v_port_type_list> ] ) ]
show
platform phy id [ interface ( <port_type> [ <v_port_type_list> ] ) ]
show
platform phy instance
Parameters
: debug Debug command setting
phy PHYs' information
Example
:
SISPM1040-582-LRT#
show platform debug
Platform debug command function is denied.
SISPM1040-582-LRT#
show platform phy
Port API Inst WAN/LAN/1G Mode Duplex Speed Link
---- --------- --------- ---- ------ ----- ----
1 Default 1G PD - - ,Yes
2 Default 1G PD - - ,No
3 Default 1G PD - - ,No
4 Default 1G PD - - ,Yes
5 Default 1G PD - - ,No
6 Default 1G PD - - ,No
7 Default 1G PD - - ,Yes
8 Default 1G PD - - ,No
9 Default 1G PD - - ,No
10 Default 1G PD - - ,No
SISPM1040-582-LRT#
show platform debug
Platform debug command function is denied.
SISPM1040-582-LRT#
platform debug allow
WARNING: The use of 'debug' commands may negatively impact system behavior.
Do not enable unless instructed to. (Use 'platform debug deny' to disable
debug commands.)
NOTE: 'debug' command syntax, semantics and behavior are subject to change
without notice.
SISPM1040-582-LRT#
show platform debug
Platform debug command function is allowed.
SISPM1040-582-LRT#
