Lantronix MSS1-T, Reference Manual

Page: 81 / 117

Commands Change Privpass
6 - 21
6.43 Change Privpass
Sets the password needed to become the privileged user of the MSS.The user will be prompted to
enter a new password of no more than six alphanumeric characters. This password will not be
displayed when typed.
Restrictions Requires privileged user status.
Default system
See Also Set Privileged, page 6-32.
6.44 Change RARP
Disables or enables querying for a RARP host at system boot time.
Restrictions Requires privileged user status.
Default Enabled
6.45 Change Retransmit Limit
Specifies the number of retries attempted if a network message receives no acknowledgment. This
limit may have to be increased on especially noisy or heavily-used networks.
Restrictions Requires privileged user status.
Parameters number
Enter a value between 4 and 100.
Default 10
6.46 Change Rlogin
Restricts the use of the Rlogin command from the server. When disabled, incoming Rlogin
connections are permitted, but users may not log into remote hosts. To view the current status of
Rlogin connections, enter the Show Server command.
Restrictions Requires privileged user status.
Default Disabled
CHANGE PRIVPASS
CHANGE RARP
DISABLED
ENABLED
 
 
 
CHANGE RETRANSMIT LIMIT number
CHANGE RLOGIN
DISABLED
ENABLED
 
 
 