Lantronix MSS1-T, Reference Manual

Page: 86 / 117

Change Telnetpad Commands
6 - 26
6.58 Change Telnetpad
When enabled, Telnetpad tells the MSS to pad Carriage Returns with null characters for Telnet
sessions. The Telnet RFC (Request for Comments) specifies Telnetpad Enabled.
Restrictions Requires privileged user status.
Default Enabled
6.59 Change Termtype
Specifies a terminal type for the port. The MSS reports this string to the remote host.
Parameters termstring
Enter a string of up to 16 characters. The string is converted to all
uppercase unless it is enclosed in quotes in the command.
None
Clears the terminal type field.
Default None
Examples
CHANGE TERMTYPE VT100
CHANGE TERMTYPE IBM1000
6.60 Change Verify
Controls the MSS’s use of informational messages whenever a session is connected, disconnected,
or switched.
Restrictions Requires privileged user status.
Default Enabled
CHANGE TELNETPAD
DISABLED
ENABLED
 
 
 
CHANGE TERMTYPE
termstring
NONE
 
 
 
CHANGE VERIFY
DISABLED
ENABLED
 
 
 