Lantronix MSS1-T, Reference Manual

Page: 65 / 117

Commands Change BOOTP
6 - 5
6.7 Change BOOTP
Disables or enables querying for a BOOTP host at system boot time.
Restrictions
Requires privileged user status.
Default
Enabled
6.8 Change Break
Determines where processing of the Break key will take place.
Restrictions Requires privileged user status.
Parameters Local
Tells the MSS to process the Break key and return the user to local mode.
Remote
Tells the MSS to ignore the Break key and pass it to the remote host.
None
Disables the Break key.
Default None
See Also Change Local Switch, page 6-14.
6.9 Change Buffering
Specifies the size of the buffer (in bytes) to use for network connections. The default size should be
sufficient in most cases, but the size can be increased for larger data transfers.
Restrictions Requires privileged user status.
Parameters buffersize
Specify a size ranging from 128 bytes to 4096 bytes.
Default 4096 bytes
CHANGE BOOTP
DISABLED
ENABLED
 
 
 
CHANGE BREAK
LOCAL
REMOTE
NONE
 
 
 
 
 
CHANGE BUFFERING buffersize