Lantronix MSS1-T, Reference Manual, Page: 74 / 117

Change Local Switch Commands
6 - 14
6.27 Change Local Switch
Defines a key that will switch the user between local mode and remote connections. The Local
Switch key functions the same as the Break key. Any key can be specified unless it conflicts with
MSS line editing, Break, Forward, or Backward keys, or keys used by remote operating systems.
Restrictions
Requires privileged user status.
Parameters character
Specify a character to serve as the switch key. To specify a control character,
precede it with a caret (^).
None
Disables the Local Switch key.
Default
No switch is configured
See Also
Change Backward Switch, page 6-4; Change Forward Switch, page 6-9.
6.28 Change Loginpass
Specifies the password used to log into the server from the serial port or the network. The user will
be prompted for a new password of no more than 6 alphabetic characters (this password is not
displayed when typed). Users are only required to provide this password if the port has Password
Protect enabled.
Restrictions Requires privileged user status.
Default access
See Also Change Password Protect, page 6-19.
6.29 Change Modem Control
Specifies whether the modem control lines can be monitored, and whether their configurations can
be changed. The MSS supports partial modem control (DSR/DTR).
Restrictions Requires privileged user status.
Does not apply to the MSS485.
CHANGE LOCAL SWITCH
character
NONE
 
 
 
CHANGE LOGINPASS
CHANGE MODEM CONTROL
DISABLED
ENABLED
 
 
 