Lantronix MSS1-T, Reference Manual

Page: 64 / 117

Change Autostart Commands
6 - 4
6.5 Change Autostart
Configures whether the port will wait for a Carriage Return before starting a connection. If
enabled, the port will start automatically.
Restrictions Requires privileged user status.
Errors A port enabled for autostart will not be idle unless DSR is held low, and
therefore will not be available for connections from the network.
Parameters Character
Sets a character that will cause a login event so that users do not have to
hit Return or configure Autostart Enabled for an extended period of time.
x
Enter the desired alphanumeric character.
Default Disabled
6.6 Change Backward Switch
Defines a key that will switch the user to a previous session without entering local mode. From
local mode, the key functions as if the Backward command was entered. Any key can be specified
unless it conflicts with MSS line editing, Break, or Forward keys, or keys used by remote operating
systems.
Restrictions
Requires privileged user status.
Parameters character
Specifies a character to serve as the switch key. To specify a control
character, precede it with a caret (^).
None
Clears any previously-defined Backward Switch key.
Default
No switch is configured
See Also
Backward, page 6-2; Change Break, page 6-5; Change Forward Switch,
page 6-9; Change Local Switch, page 6-14; Forward, page 6-27.
CHANGE AUTOSTART
DISABLED
ENABLED
CHARACTER X
 
 
 
 
 
CHANGE BACKWARD SWITCH
character
NONE
 
 
 