Lantronix MSS1-T, Reference Manual

Page: 69 / 117

Commands Change Flow Control
6 - 9
6.15 Change Flow Control
Sets the type of flow control to be used on the port.
Restrictions Requires privileged user status.
Does not apply to the MSS485.
Parameters CTSRTS
Hardware flow control is used.
None
Flow control is not used.
SlowCTS
A less aggressive method of hardware flow control is used in which the
MSS flow-controls the sender sooner than it would when using CTS/RTS
flow control. SlowCTS allows the MSS to reliably communicate with
devices that implement CTS/RTS flow control in software, and therefore
cannot respond to changes in the same way as true hardware flow
control.
XONXOFF
Software flow control is used.
Default XONXOFF
6.16 Change Forward Switch
Defines a key that will switch the user to the next session without entering local mode. From local
mode, the key functions as if the Forward command was entered. Any key can be specified unless
it conflicts with MSS line editing, Break, or Backward keys, or keys used by remote operating
systems.
Restrictions Requires privileged user status.
Parameters character
Type a character to serve as the switch key. To specify a control character,
precede it with a caret (^).
None
Clears the previously-defined Forward Switch key.
Default No switch is configured
See Also Change Backward Switch, page 6-4; Change Break, page 6-5; Change
Local Switch, page 6-14; Forward, page 6-27.
CHANGE FLOW CONTROL
CTSRTS
NONE
SLOWCTS
XONXOFF
 
 
 
 
 
 
 
CHANGE FORWARD SWITCH
character
NONE
 
 
 