Lantronix MSS1-T, Reference Manual

Page: 79 / 117

Commands Change Password Limit
6 - 19
6.39 Change Password Limit
Limits the number of failures allowed when entering the Set Privileged command. After the
specified number of retries, the port will be logged out. The user can abort the password process
by typing Ctrl-Z instead of the password.
Restrictions
Requires privileged user status.
Parameters number
Enter a value between 0 (no limit) and 100.
Default
3
6.40 Change Password Protect
Controls whether a password is needed to log into the MSS from the serial port. The Change
Loginpass
command is used to set the password.
Restrictions Requires privileged user status.
Default Disabled
6.41 Change Portname
Renames the serial port.
Restrictions Requires privileged user status.
Parameters name
Enter a 16-character name composed of alphanumeric characters or the
underscore character enclosed in quotation marks. If the name is not
enclosed in quotation marks, it will be converted to uppercase.
Default Port_1
CHANGE PASSWORD LIMIT number
CHANGE PASSWORD PROTECT
DISABLED
ENABLED
 
 
 
CHANGE PORTNAME name