Lantronix MSS1-T, Reference Manual

Page: 68 / 117

Change Domain Commands
6 - 8
6.12 Change Domain
Specifies the default domain name to be used when attempting to resolve text TCP/IP host names.
Restrictions
Requires privileged user status.
Parameters DomainName
Enter a domain name of no more than 64 characters.
None
Disables a configured domain.
6.13 Change DSRlogout
If enabled, the port will be logged out when its DSR signal is de-asserted. This logout usually
happens only when the attached device is turned off or disconnected. The feature is intended to
keep users from switching terminal lines to access other sessions. Open connections will be closed
before logout.
When modem control is enabled, DSRlogout is implicitly enabled because the two features use the
same signals. However, modem control must be disabled to use DSRlogout.
Restrictions Requires privileged user status.
Does not apply to the MSS485.
Default Disabled
6.14 Change DTRwait
If enabled, the MSS will not assert the DTR signal on the serial port until a user logs into the port,
or until a network connection is made to the port.
Restrictions Requires privileged user status.
Does not apply to the MSS485.
Default Disabled
CHANGE DOMAIN
DomainName
NONE
CHANGE DSRLOGOUT
DISABLED
ENABLED
 
 
 
CHANGE DTRWAIT
DISABLED
ENABLED
 
 
 