Lantronix MSS1-T, Reference Manual

Page: 76 / 117

Change NetWare Encapsulation Commands
6 - 16
6.32 Change NetWare Encapsulation
Configures the frame types that the MSS will pay attention to during IPX connections. When
NetWare routing is enabled with the Change NetWare Routing command, all frame types are
enabled regardless of the settings made with this command.
Restrictions Requires privileged user status.
Errors When more than one frame type is enabled, NetWare routing must also
be enabled.
Parameters Ether_II
Enables Ethernet v2 frame type.
Native
Enables the “native mode” NetWare frame type.
Snap
Enables the 802.2 frame type with SNAP SAPs.
802_2
Enables the 802.2 frame type with NetWare SAPs.
Defaults Enabled (all)
Internal routing enabled
See Also Change NetWare Internal Network, page 6-16; Change NetWare Routing,
page 6-17; Show NetWare, page 6-32.
6.33 Change NetWare Internal Network
Changes the MSS’s preset internal network number. Each MSS has a default internal network
number derived from the unit’s Ethernet address. This number is used for internal NetWare
routing.
Restrictions Requires privileged user status.
Parameters number
Specify the MSS’s new internal network number in the format annnnnnn
where a represents a letter and each n represents a number.
See Also Change NetWare Encapsulation, page 6-16; Change NetWare Routing,
page 6-17; Show NetWare, page 6-32.
CHANGE NETWARE ENCAPSULATION
ETHER_II
NATIVE
SNAP
802_2
 
 
 
 
 
 
 
DISABLED
ENABLED
 
 
 
CHANGE NETWARE INTERNAL NETWORK number