Lantronix MSS1-T, Reference Manual

Page: 92 / 117

Set Privileged Commands
6 - 32
6.74 Set Privileged
Changes the port’s privileged status. When the command is entered, the MSS will prompt the user
for the privileged password. If the password is forgotten, the server can be reset to factory
defaults.
Restrictions
Secure users may not become the privileged user.
Only one port can be the privileged port at one time.
Parameters Privileged
Allows a user to become the port’s privileged user.
Override
Forces the current port to become the privileged port (the previous port
loses the privilege).
Noprivilege
Removes privileged status for the port.
See Also
Change Privpass, page 6-21.
6.75 Show IPsecurity
Displays the current TCP/IP security table. Each address or range is shown, along with the
direction of concern.
6.76 Show Hostlist
Displays the current list of remote hosts to use for multihost mode connections.
See Also Multihost Mode, page 5-9; Host, page 6-28.
6.77 Show NetWare
Displays NetWare characteristics, including enabled frame types, routing status, and current
internal network number.
SET
PRIVILEGED OVERRIDE
NOPRIVILEGE
SHOW IPSECURITY
SHOW HOSTLIST
SHOW NETWARE