Lantronix MSS1-T, Reference Manual, Page: 93 / 117

Commands Show Nodes
6 - 33
6.78 Show Nodes
Displays information about the desired LAT service nodes.
Errors
All nodes will be shown if no node is specified.
Parameters LAT
Shows LAT nodes, including their identification strings and availability.
SPX
Shows information about SPX nodes including their hop counts, frame
types, and availability.
6.79 Show Ports
Displays all serial port settings. Settings include the port’s connection status, including the
number of sessions and information about the current session; the flow control state (enabled or
disabled) as well as the state of DSR and DTR serial signals; the access type and login status of the
port; and additional settings including baud rate, parity, and dedicated or preferred services.
6.80 Show Server
Displays different types of server information. If no keyword is entered after Show Server, the
MSS will display server characteristics.
Parameters Bootparams
Displays general MSS parameters that relate to the boot procedure and
reloading the software file.
Counters
Displays error information for the Ethernet and TCP/IP protocols.
Characteristics
Displays the MSS’s serial port settings including hardware address, timer
limit, password limit, session limit, retransmission limit, IP address,
subnet mask, nameserver, gateway, and more.
SHOW NODES
LAT
SPX
 
 
 
SHOW PORTS
SHOW SERVER
BOOTPARAMS
COUNTERS
CHARACTERISTICS