94
Operating Manual
General Operating Instructions
OMBG3000 – Iss.01
© Copyright 2016
Screen 12 - Configure Sample Times (E variant)
2)
Press the right soft key to ‘Exit’ without saving any changes.
3)
To edit a parameter, press the middle soft key to enter ‘Edit’ mode.
4)
Using the scroll keys, select a sample point to edit (highlighted in the
table) and select the field with the
key.
Note: In addition to each sample point being editable, the ‘Sample’ time
is also an editable parameter. This is the total time of the cycle before
sample point 1 (or external cell) is monitored again.
Screen 13 - Edit Sample Point Times