LANCOM WLC series
Chapter 4: Configuring the WLAN Controller
88
EN
also entered into the backup controller's AP table along with their MAC
addresses, the backup controller can fully take over the management of
the Access Points. Changes to the WLAN profiles in the backup controller
will directly affect the managed Access Points.
In this scenario, the Access Points remain under the management of
the backup controller until this itself becomes unavailable or is man-
ually disconnected (’Disconnect Access Point’
→
page 112).
If the Access Points are set up for standalone operation (’Self-suffi-
cient operation’
→
page 52) they will remain operational while
searching for a backup controller, and the WLAN clients will remain
associated.
햸
In LANmonitor the connections between the access points and controllers
are displayed: At this time, local access points are managed by the rele-
vant controller itself. Access Points in the "cluster" are managed by
another controller, although they could also be taken over by the former
controller.