LANCOM WLC series
Chapter 4: Configuring the WLAN Controller
45
EN
(Network) name: Give the WLAN a name. This name is used only for
administrative purposes in the LANCOM WLAN Controller.
SSID: This SSID is used for the WLAN clients to connect.
Encryption: Select the encryption method suitable for the WLAN cli-
ents being used, and enter a key or passphrase, as applicable.
Deactivate the MAC check. Instructions on the use of MAC filter lists
in managed WLAN infrastructures can be found under ’Checking
WLAN clients with RADIUS (MAC filter)’
→
page 106.
햵
A new entry also has to be added to the physical WLAN parameters. In
most cases involving the default configuration, just entering a name is
sufficient. Adjust the other settings to meet your needs, if necessary.
For normal access point applications you should use only the 5-GHz
subbands 1 and 2. Subband 3 is for special applications only
(e.g. BFWA, Broadband Fixed Wireless Access).