LANCOM WLC series
Chapter 4: Configuring the WLAN Controller
55
EN
Inheritance
Selection of a logical WLAN network defined earlier and from which the
settings are to be inherited (’Inheritance of parameters’
→
page 76).
Country
The country in which the Access Point is to be operated. This information
is used to define country-specific settings such as the permitted channels,
etc.
Possible values:
Select from the list of countries.
Default:
Blank
Special values:
'Default' makes use of the country setting defined in the 'Options'
area.
Automatic channel selection
As standard the Access Points can use all of the channels permitted in the
country of operation. To limit the selection to certain channel, the desired
channels can be entered here as a comma-separated list (e.g. '1,6,11').
Ranges can also be defined.
Possible values:
Maximum 16 characters.
Default:
Blank
Management VLAN ID
The VLAD ID for the management network that is to manage the Access
Points.
Possible values:
0 to 4094
Default:
0
Special values:
0: In general the VLAN function should be switched off—also for all
logical WLANs (SSIDs), whatever VLAN configuration they may have.