LANCOM WLC series
Chapter 2: Installation
23
EN
The power LED blinks alternately in red/green until a configuration
password has been set. Without a configuration password, the con-
figuration data in the LANCOM is unprotected. Normally you would
set a configuration password during the basic configuration (instruc-
tions in the following chapter). Information about setting a configu-
ration password at a later time is available in the section 'The Security
Wizard'.
쐇
Fan
The Fan LED displays the fan's status:
To prevent damage to the hardware, this LED is complemented by an acoustic
signal. If the fan is blocked or the CPU temperature exceeds 60°, a pulsed
acoustic signal is emitted.
쐋
COM
Connection status of the serial configuration interface
Green
On (perma-
nently)
Device operational
Red/green
Blinking alter-
nately
Device insecure: Configuration password not set
Red
blinking
Time limit for online connections has been reached
Green
On (permanently)
CPU temperature OK
Orange
On (permanently)
CPU temperature > 55°
Red
blinking
Hardware failure of the fan or CPU temperature > 60°;
additional acoustic signal
Off
No session logged on
Green
On (perma-
nently)
Serial configuration session logged on
Orange
Flickering
Data transmission during the configuration session