LANCOM WLC series
Chapter 4: Configuring the WLAN Controller
72
EN
stored in the '802.11i/WEP' area will be used for each logical wireless LAN
network (on the WLAN Controller in the definitions of logical WLANs
(SSIDs)).
Possible values:
ASCII character string with a length of 8 to 63 characters
Default:
Blank
TX bandwidth limit
Bandwidth restriction for registering WLAN clients. A LANCOM WLAN
device in client mode communicates its own settings to the base station
when logging in. The Access Point uses these values to set the minimum
bandwidth.
Possible values:
0 to 65535 kbps
Default:
0
Special values:
0: No limit
RX bandwidth limit
Bandwidth restriction for registering WLAN clients. A client communicates
its own settings to the base station when logging in. The base station uses
these values to set the minimum bandwidth.
Possible values:
0 to 65535 kbps
Default:
0
Special values:
0: No limit
The RX bandwidth restriction is only active for LANCOM WLAN
devices in client mode. For value is not used by normal WLAN clients.
VLAN ID
This VLAN ID is assigned to packets that are received from the client with
the MAC address entered here.