manualshive.com logo in svg

Lancom WLC-4006, Manual, Page: 138 / 148

Share
Download
Lancom WLC-4006 Manual Download Page 138

LANCOM WLC series

 Chapter 8: Providing dial- in access

137

EN

lished, the computer can access and search the other network (click
on 

Search

 

 

Computer

, do not use the Network Neighborhood).

8.2

Settings on the dial-in computer

For dialing-in to a network via VPN, a computer needs:

Internet access

A VPN client

LANCOM Systems offers you a 30-day test version of the LANCOM Advanced
VPN Client on the CD supplied. A precise description of the VPN client and
notes on its setup are also to be found on the CD.

The Wizard then requests the parameters that were specified when setting up
the RAS access in the LANCOM Router. 

8.3

Instructions for LANconfig

햲

Launch the 'Provide Remote Access (RAS, VPN, IPsec over WLAN)' Wizard.
Follow the Wizard’s instructions and enter the necessary data.

햳

The Wizard will inform you when the required information is complete.
You can then close the Wizard with 

Finish

.

햴

Configure the access account on the dial-in PC as described. Subsequently
test the connection (see box 'Ping – the quick test of a TCP/IP connec-
tion').

Summary of Contents for WLC-4006





















































































































































Reviews:

No comments