manualshive.com logo in svg

Lancom WLC-4006, Manual, Page: 21 / 148

Share
Download
Lancom WLC-4006 Manual Download Page 21

LANCOM WLC series

 Chapter 2: Installation

20

EN

2 Installation

This chapter will assist you to quickly install hardware and software. First,
check the package contents and system requirements. The device can be
installed and configured quickly and easily if all prerequisites are fulfilled.

2.1

Package content

Before beginning with the installation, please check that nothing is missing
from your package. Along with the device itself, the box should contain the
following accessories:

Should anything be missing, please take up immediate contact to your dealer
or to the address on the delivery note supplied with your device.

2.2

System requirements

2.2.1

Configuring the LANCOM devices

Computers that connect to a LANCOM must meet the following minimum
requirements:

Operating system with TCP/IP support, suchas Windows, Linux, BSD Unix,
Apple Mac OS, OS/2.

Access to the LAN via the TCP/IP protocol.

LANCOM WLC-

4006

LANCOM WLC-

4025+

LANCOM WLC-

4100

IEC cable

✔

✔

Power adapter

✔

CAT5 LAN connector cable (green connectors)

✔

✔

✔

RS232 connector cable for the configuration inter-
face

✔

✔

✔

Rubber pads, 19" mounting brackets

✔

✔

LANCOM CD

✔

✔

✔

Printed Installation Guide

✔

✔

✔

Printed User Manual 

✔

✔

✔

LANCOM Configuration Service Ticket

✔

✔

✔

Summary of Contents for WLC-4006





















































































































































Reviews:

No comments