LANCOM WLC series
Chapter 4: Configuring the WLAN Controller
48
EN
The option 'Automatically accept new APs' can remain active so that,
after a reset, the WLAN Controller can automatically provide expected
Access Points—as entered into the AP table—with valid certificates.
4.2
Extended settings
Most of the parameters for configuring the LANCOM WLAN Controller corre-
spond with those of the Access Points. For this reason, this documentation
does not explicitly describe all of the WLAN parameters, but only those
aspects necessary for operating the WLAN Controller. Information on the
available WLAN parameters can be found in the LCOS reference manual.
4.2.1
General settings
This area is for the basic settings of your WLAN Controller.