Appendix
Switch and key combinations
on the VMS / FMS front panel
Action
Switch Position
Switch Position
Buttons / Other
top selector switch (1)
bottom selector switch (2)
_____________________________________________________________________________________________________
Recall correction ranges Status
Monitoring display
Acceptance
Automatic
Setting
Clear memory
Cold start (long reset)
Status
Fault / Switch 1 OPEN
Warm start (short reset) Status
Fault / Switch 1 OPEN and
Switch 2 OPEN
Code entry for
Status
Parameterisation
Switch 2 / 3 OPEN
parameterisation
Switch 4 CLOSE
Scan fault history
Status
Monitoring display
Channel 1 switch
Automatic
OPEN or CLOSE
Setting
(not in fault mode)
Clear memory
Recall correction
Load rating
Acceptance
input values
Load adjustable via
Load rating
Automatic
Channel 1 switch open/ close
switch 1 (manual operation)
Quit manual mode
Load rating
Automatic
operate a switch,
channel 2,3 or 4
Load adjustable via
Load rating
Setting
Channel 1 switch
switch 1 (internal load default)
OPEN or CLOSE
EG / ES mode
Load rating
Setting
Channel 3 switch CLOSE
is activated
Clear memory
Mode GL or RG
(EI on display)
Compound engaged
(No "ES barred” message)
EG / ES mode
Setting
Switch on front panel
is terminated
Clear memory
operated in EG or ES mode
Exception Switch 1 at sep.
ignition point or load default
configured via switch
Display of running time
Set-point value
Monitoring display
Acceptance
meter / Starts counter
Automatic
Store point
Set-point value
Setting
Acceptance
Actual value feedback
Clear present curve
Set-point value
Clear memory
Acceptance
Display of acceptance data
Set-point value
Acceptance
CRCs for all levels
feedback
Oil/gas safety times
Pre-ventilation time
Traverse channels
Set-point value
Setting
Switch 1 - 4
Actual value feedback
Channel 5 set-point adjustable
Channel 5 display
Setting
Switch 2
Scanning of serial No.
Actual value feedback
Monitoring display
Acceptance
Automatic
Call up
Actual value feedback
Automatic
Channel 3 switch up
flame intensity
126
