Settings
Condition on delivery
Condition on delivery
All units are set according to the order. Settings not evident from the
ID number or configuration number must be indicated separately.
In particular:
Outputs
- whether continuous or three-point step
- whether 0 … 10 V, 0/4 … 20 mA
- position of the outputs in the event of fault
Inputs, load, feedback
- Whether potentiometer or 0/4 … 20 mA or step
- Whether inputs are used doubled (redundant) and if so, which
(possible only if the integrated power control unit is not used)
- Whether special plug-in configuration cards
(PT 100, Namur transmitter) are used
Correction input
- Whether 0 … 20 or 4 … 20 mA or direct temperature connection
- Mode of operation, on which channel, upward or downward shift
(modifiable only via software)
Assignment of
Backplane
sockets to inputs
Configuration cards
(examples)
Feedback 1
Corr. Input 1
Corr. Input 2
Load input or load
control unit value
Feedback 2
Feedback 3
Feedback 4
Feedback 5
Red. Feedback 1
Red. Feedback 2
Red. Feedback 3
Red. Feedback 4
or atmosphere control
or flame sensor module
17
R4 = 0
W
R4 = 0
W
R4 = 0
W
R8 = 2K2
R10 = 2K2
R15 = 0
W
R12 = 0
W
R12 = 0
W
R11 = 0
W
R16 = 0
W
R17 = 0
W
R15 = 0
W
Potentiometer
Configuration
TPS
configuration
0/4 … 20mA
configuration
TM1
R17
R18
R16
R13
R14
R15
R5
R11
R12
R10
R7
R9
R8
R4
D1
T1
C1
R6
R2
R3
D2
R1
D2
D1
R10
R12
R16
R4
R15
R8
R11
R18
R9
R7
R13
R14
R17
R1
R3
R5
R2
R6
C1
TM1
T1
TM1
R10
R12
R11
R5
R16
R18
R17
R13
R15
R14
R9
R7
R4
R8
R2
R6
C1
T1
D1
D2
R3
R1
