54
www.howdens.com
Built-in Single Pyrolytic Oven
LAM3708 LAM3709
9. Installation
If the product is to be placed
under the counter: (Figure 2)
• In order to provide the
necessary ventilation in the
back of the kitchen furniture,
openings should be created in
the dimensions shown in figure 2.
• The electrical connection must
be in the area
A
in figure 2 or
outside the installation site.
• If the product is to be placed
under a hob, follow the
dimensions given in the hob
installation manual.
If the product is to be placed
in the tall cabinet: (Figure 3)
• In the back compartment
of the kitchen furniture,
openings should be created
in the dimensions shown in
figure 3 in order to provide
the necessary ventilation. This
opening should be along the
height of the cabinet.
• If there is a back panel of the
tall cabinet where the product
will be placed, it must be
removed.
• The electrical connection must
be in the
A
area in figure 3 or
outside the installation area.
If the product is to be placed
to the corner: (Figures 4a and 4b)
• Attention should be paid to the
dimensions given in order to
make the corner installation in
the figures 4a and 4b.
Connecting the appliance
to the electricity supply
• Only connect the product to
a grounded outlet/line with
the voltage and protection
as specified in the “Technical
specifications”. Have the
grounding installation made
by a qualified electrician
while using the product with
or without a transformer. Our
company shall not be liable for
any problems arising due to
the product not being earthed
in accordance with the local
regulations.
• Before starting any work on
the electrical installation,
disconnect the product from
the mains supply. There is the
risk of an electric shock!
• The product must be connected
to the mains supply only by
an authorised and qualified
person. The product’s warranty
period starts only after correct
installation. Manufacturer
shall not be held responsible
for damages arising from
procedures carried out by
unauthorised persons.
• The appliance must be installed
so that it can be completely
disconnected from the mains
supply. The separation must be
provided by a switch built into
the fixed electrical installation,
according to construction
regulations.
