44
www.howdens.com
Built-in Single Pyrolytic Oven
LAM3708 LAM3709
Cleaning the accessories
Unless otherwise stated in the user
manual, do not wash the product
accessories in the dishwasher.
Cleaning the control panel
• When cleaning the panels with
knob control, wipe the panel
and knobs with a damp soft
cloth and dry with a dry cloth.
Do not remove the knobs and
gaskets underneath to clean the
control panel. The control panel
and knobs may be damaged.
• While cleaning the inox panels
with knob control, do not use
inox cleaning agents around
the knobs. The indicators around
the knobs may be deleted.
• Clean the touch control panels
with a damp soft cloth and dry
with a dry cloth. If your product
has a key lock feature, set the
key lock before performing
control panel cleaning.
Otherwise, incorrect detection
may occur on the keys.
Cleaning the inside of the
oven (cooking area)
Follow the cleaning steps
described in the “General
cleaning information” section
according to the surface types in
your oven.
Cleaning the side walls
of the oven
The side walls in the cooking
area can only be covered with
enamel or catalytic walls. It varies
by model. If there is a catalytic
wall, refer to the “Catalytic walls”
section for information.
If your product is a side rack
model, remove the side racks
before cleaning your side walls.
Then complete the cleaning
as described in the “General
cleaning information” section
according to the side wall surface
type.
To remove the side racks:
1. Remove the front of the side
rack by pulling it on the side
wall in the opposite direction.
2. Pull the side rack towards you
to remove it completely.
3. To reattach the shelves,
the procedures applied
when removing them must
be repeated from the end
to the beginning, respectively.