23
Instructions and Installation
5. How to operate the oven
General information on
oven usage
Cooling fan (It may not exist on
your product.)
Your product has a cooling fan.
The cooling fan is activated
automatically when necessary and
cools both the front of the product
and the furniture. It is automatically
deactivated when the cooling
process is finished. Hot air comes
out over the oven door. Do not
cover these ventilation openings
with anything. Otherwise, the oven
may overheat.
The cooling fan continues to
operate during oven operation
or after the oven is turned off
(approximately 20-30 minutes).
If you cook by programming the
oven timer, at the end of the
cooking time, the cooling fan turns
off with all functions. The cooling
fan running time cannot be
determined by the user. It turns
on and off automatically. This is not
an error.
Oven lighting
The oven lamp is turned on when
the oven starts cooking. In some
models, the lamp is on during
cooking, while in some models it
turns off after a certain time. If the
product door is opened while the
oven is operating or in the closed
position, the oven lamp turns on
automatically.
In some operating functions,
the lamp does not light due to
energy savings.
Operation of the oven
control unit
General warnings for the oven
control unit
The maximum time that can
be set for the end of the
time is 5:59 hours. In warn
keeping function, this time is
23:59 hours. In the event of
a power failure, the cooking
and cooking time set will be
cancelled.
While making any
adjustments, the relevant
symbols flash on the display.
A short time should be waited
for the settings to be saved.
If any cooking setting has
been made, the time of the
day cannot be adjusted.
If cooking time is set when
cooking starts, the remaining
time is displayed on the
display.
If the quick preheat (booster)
setting is enabled on your
control unit, the symbol
appears on the display
when you start cooking
and the oven reaches the
temperature you set for
cooking quickly. For the quick
preheat (booster) setting,
please see
“Settings”
section.
