52
www.howdens.com
Built-in Single Pyrolytic Oven
LAM3708 LAM3709
8. Troubleshooting
Consult the Authorised Service Agent or technician with license or the
dealer where you have purchased the product if you cannot remedy
the trouble although you have implemented the instructions in this
section. Never attempt to repair a defective product yourself.
Oven emits steam when it is in use
• It is normal that steam escapes during operation. ›››
This is not a fault
.
Water drops occur during cooking
• The vapour that arises during cooking can condense and form water droplets when
it hits cold surfaces of the product. ›››
This is not a fault
.
Product emits metal noises while heating and cooling
• The vapour that arises during cooking can condense and form water droplets when
it hits cold surfaces of the product. ›››
This is not a fault
.
Product does not operate
• The mains fuse is defective or has tripped. ›››
Check fuses in the fuse box.
If necessary, replace or reset them.
• Product is not wired into the (grounded) socket. ›››
Check the electrical connection.
• Buttons/knobs/keys on the control panel do not function. ›››
If your product equipped
with key lock function, key lock may be enabled. Please disable it.
Oven light does not work
• Oven lamp is defective. ›››
Replace oven lamp.
• Power is cut. ›››
Check if there is power. Check the fuses in the fuse box. If necessary,
replace or reset the fuses.
Oven does not heat
• Might not be set to a certain cooking function and/or temperature. ›››
Set the oven to
a certain cooking function and/or temperature.
• In models equipped with a timer, the timer is not adjusted. ›››
Adjust the time.
• Power is cut. ›››
Check if there is power. Check the fuses in the fuse box. If necessary,
replace or reset the fuses.
• The oven door might be open. ›››
Make sure the oven door is closed. If the oven door
remains open for more than approx. 5 minutes, the cooking time settings will be
cancelled and the heaters will not work.
(In models with timer) Clock display is blinking or clock symbol is on
• A previous power outage has occurred. ›››
Adjust the time / Switch of the product
and switch it on again.
After the cooking has started, the symbol is constantly flashing on the
display and giving an audible warning
• The oven door may be open. ›››
Make sure the oven door is completely closed.
If the error persists, contact the authorized service.
