56
www.howdens.com
Built-in Single Pyrolytic Oven
LAM3708 LAM3709
If the product is produced
with cable and without plug
• A power cable that it is defined
in the technical table home
must be connected to product
by following the instructions.
Power cable must not be
longer than 2m because of
safety reasons.
• Open the terminal block cover
with a screwdriver.
• Insert the power cable through
the cable clamp below the
terminal and secure it to the
main body with the integrated
screw on cable clamping
component.
• Connect the cables according
to the supplied diagram.
BROWN
cable
=
L
(Phase)
BLUE
cable =
N
(Neutral)
GREEN
/
YELLOW
cable = (
E
)
(Ground)
C
= Cable clamp
• After completing the wire
connections, close the
terminal block cover.
• Connect the power cable
to supply power by routing it
so that it will not contact the
product and get squeezed
between the product and
the wall.
Prevention against possible
fire risk!
• Ensure all electrical connections
are secure and tight to prevent
risk of arcing.
• Do not use damaged cables
or extension cables.
• Ensure liquid or moisture is not
accessible to the electrical
connection point.
Placing and fixing the product
(Figure 5)
• Place the appliance on the
furniture, centred with two or
more people.
• Fix the product to the furniture
using the screws provided as
shown in figure 5.
• At the end of the installation,
check that the screws are
properly tightened and that
the product is firmly fixed. If
the product is not installed
in accordance with the
instructions and the screws are
not properly tightened, there is
a risk of tipping during use.
L
C
E
N
