Lakeland 17892, Instruction Booklet

Page: 4 / 43

6 7
• This appliance complies with the basic requirements of Directives 04/108/EC (Electromagnetic
Compatibility) and 06/95/EC (Safety of Domestic Electrical Appliances)
• WARNING; A cut off plug inserted into a 13amp socket is a serious safety (shock) hazard.
Ensure the cut off plug is disposed of safely.
• The temperature of all surfaces marked with this symbol will be very hot when the
appliance is in use. DO NOT TOUCH these surfaces as possible injury could occur. Allow to cool
completely before handling this appliance.
• CAUTION; The plastic bags used to wrap this appliance or the packaging may be dangerous.
To avoid risk of suffocation, keep these bags out of reach of babies and children. These bags
are not toys.
• Do not operate empty unless the instructions advise otherwise e.g for the first use.
• Do not touch any moving parts whilst in use.
• Do not lift or move the Bread Maker whilst in use.
• Do not cover the Bread Maker or block the air vents in the lid or sides whilst in use.
• Make sure there is plenty of air circulation around the Bread Maker when in use.
• The bread pan will be very hot – always use oven gloves to remove the hot bread pan from
the oven chamber.
• The kneading paddle will be very hot after use, always use an oven glove or cloth when
handling.
• Do not place hands in the oven chamber after the bread pan has been removed as it will be
very hot.
THE CONTROL PANEL AND PROGRAMMES
The Bread Maker does not have a separate on/off switch. Simply plug in and switch on at the
socket. After switching on at the socket the LCD in the display screen will be illuminated (see Fig.1)
and you will hear a beep.
Fig.1
After a few seconds “1000g, 1, MEDIUM, 3:00” appears in the display screen (see Fig.2). This is the
default setting and will appear every time you turn on the machine.
Fig.2
START/STOP
For starting and stopping the selected programme.
To START a programme, press the START/STOP button for approx. 2 seconds. A short beep will be
heard and the two dots in the time display begin to flash. The programme will start.
To STOP a programme, press the START/STOP button for approx. 2 seconds until a beep confirms
that the programme has been switched off.
PAUSE
Press the PAUSE button to interrupt the programme at any time (to add ingredients, stir in flour
that may not be fully mixed in etc). The machine will pause but the setting will be memorised for
10 minutes. The working time will be flashed on the display screen. Press PAUSE again to restart
the programme
LIGHT
A light allows you to check the progress of your loaf. Simply press the LIGHT button once and
the inside of the chamber will be illuminated. The light stays on for 1 minute and will then go
out automatically but you can also turn the light off yourself by pressing the LIGHT button again.