3
AT. If the safety glasses are not marked with letter T placed directly after the
CE
CE mark
symbol of impact protection, the eye protection can be used to protect
against high speed particles at room temperature only.
n
PRX
manufacturer's ID
1
optical class
F
symbol that marks the protection against high speed particles
moving up to 45 m/s and featuring low impact energy
EN 166
number of standard used to assess the conformity
NOTE:
Materials used to manufacture the glasses (see table
«Technical
Model 46035:
specifications»
) usually do not cause any allergic reactions. However,
CE
–
CE mark
;
some rare cases of such reactions can occur in people allergic to plastics.
5-3.1
–
sun glare filter catalog number
;
Should it occur, stop wearing the safety glasses immediately and consult a
doctor.
PRX
–
manufacturer's ID
;
1
–
optical class
;
n
F
–
symbol that marks the protection against high speed particles
moving up to 45 m/s and featuring low impact energy
;
EN 166
–
number of standard used to assess the conformity
.
Notified body
:
The process of standard compliance assessment has been performed by
notified body NB 0530
Address:
CERTOTTICA SCARL, Zona Industriale Villanova, 32013 -
n
Spare parts and accessories:
Longarone (BL). Italy
n
Identification of symbols on the package
(Fig.
B
)
:
n
Durability:
1.
Polycarbonate lens
n
Identification of symbols:
A
34, Marywilska St., 03-228 Warsaw, Poland
Storage and transport:
Cleaning, maintenance, disinfection:
–
;
–
;
Do not clean the glasses with any abrasive, scratching or caustic agents.
–
;
Clean them with warm water and mild soap. After cleaning wipe them
–
dry with a cotton or flannel cloth. Use alcohol to disinfect the parts that
;
touch the user's skin.
–
.
To protect the safety glasses against damage, store them in a case. Store
the glasses in a place at a humidity of below 90% and at temperature
ranging from 5 to 40 °C. Store them away from any chemical and abrasive
substances and at a minimum distance of 2 metres from heating devices.
Factory packaged safety glasses can be carried by any means of transport
under conditions described above when providing additional protection
against mechanical damage.
Use only original and properly selected spare parts.
Check the safety glasses for any damage on a regular basis. The glasses
lose their usability if any damage, loss in lenses transparency,
discolorations, scratches or lens or frame cracks occurs. In such cases it is
necessary to replace the glasses by a new pair.
The marks are etched on the lens and/or frame (example in Fig. ).
Model 46033:
2C
-
1.2
– catalogue number of anti-UV filter, unchanged perception of
colours
;
3.
UV filter
n
2.
Sun glare filter
4.
Manufacturer:
PROFIX Co. Ltd.
Addres:
Protection efficiency
n
Technical specifications
Model
Protection efficiency
O
ptical class
Filter
Materials
46033
46035
F
F
1
1
5-3.1
-
sun glare filter
lens
frame
– polycarbonate
–
+
silicon earpieces
polycarbonate
This user's manual
is
protected by copyright.
Copying it
without the written consent of PROFIX Co. Ltd. is prohibited.
lens
frame
– polycarbonate
–
+
silicon earpieces
polycarbonate
2C-1.2
–
UV filter unchanged
perception of colours
;
,
