2
USER'S MANUAL
SAFETY GLASSES
:
46033 / 46035
Original text translation
WARNING! These glasses do not provide unlimited
eye protection. Before you start using these
glasses read all safety use warnings and tips.
Failure to observe the safety warnings and tips provided
below may result in serious injuries.
Keep these warnings and tips for future reference.
n
A
WARNING:
Glasses with scratched or damaged protective
lenses should be replaced.
These glasses are designed to provide eye protection against fast moving
The glasses are resistant to chipping solids with a low impact energy
fine particles. The glasses meet the requirements
(hitting speed up to 45 m/s with a ball weighing 0 86 g), and protect
(depending on model and filter used) against sun glare, (see table
).
The glasses are intended to provide eye protection against mechanical
impacts caused by such particles as: metal filings, wood or wall chips,
and splashes of various liquids etc. The glasses should be worn when
carrying out various operations at sites where a risk of damage to the eye
caused by the above-listed factors occurs.
length of arms (3 x 5mm) (see Fig. ).Soft elastomer arm tips ensure
higher safety and comfort.
NOTE:
In case of any damage to the safety glasses stop working
immediately and replace them by new ones.
Application:
n
Protection efficiency:
of
,
and
«Technical specifications»
WARNING: Eye protective glasses designed to
protect the eye against the impact of high speed
particles worn together with corrective eyeglasses
can transfer the impact causing a risk to the user.
NOTE:
If any protection against high speed solid particles at extreme
It is prohibited to use them to protect eyes during welding.
temperatures is required, the eye protection selected should be marked
The size of glasses is universal. They offer the possibility to adjust the
with letter T following directly the symbol of impact protection, i.e. FT,
BT or
Regulation
2016/425
EN 166:2001
The internet address where the EU
declaration of conformity can be accessed:
www.lahtipro.pl
standard.
A
85 mm
100 mm
3 5mm
X
PRX EN166 F
5 - 3.1 PRX 1F
B
1.
2.
4.
3.
