18)
LANGUAGE
Ÿ
Use F2 and buttons to move arrow to the language desired.
Ÿ
Press EXIT (SET) button to return to general programming menu.
19) PASSWORD MANAGEMENT
This section shows three types of password.
a) TECHNICAL PASSWORD (for technical personnel in charge of installation and maintenance)
It is a 10-character password of installer who starts the system.
Using a technical password is compulsory to prevent unauthorized persons from having access to general programming menu sections
concerning parameters and functions setting, initial set-up and maintenance area.
Default preset technical password is “A-A-A-A-A-A-A-A-A-A”.
WARNING!
It is recommended to change the default technical password and be very careful not to forget it.
b) PRIMARY PASSWORD (for the system's owner-user)
It is a 5-character password used by the user to prevent unauthorized persons from having access to N-DSEL programmer and change the
work program.
Using a primary password is optional and must be enabled by system's owner.
Default preset primary password is “A-A-A-A-A”.
WARNING!
When enabling the password, be very careful not to forget the access combination.
c) SERVICE PASSWORD (for user)
It is a 5-character password that the system's owner may divulge to persons to be authorized to use N-DSEL programmer.
The service password only allows changing the automatic door work program.
Default preset service password is “A-A-A-A-A”.
To change the service password, it is necessary to have access by primary password.
Use button to move the selection arrow downward, F2 button to move the arrow upward.
39
