This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. It may be modified at any time in accordance with product changes.
_N°7386
Installation_Totem operator (Sliding gate)
09/21
p.24
LED status information :
Off =
Proper operation
Green =
Safety sensing device
3
-
Programming the flashing light :
Step 1 :
Flashing light power supply.
-
Insert the 3 batteries Type C
-
LR14 / 1,5V
into the flashing light respecting the polarities.
Step 2 :
Programming the flashing light on the MASTER board.
-
Hold down button
S1
for 3 s, then release,
LED DL7
on the control board flashes red.
-
Press the
S4
button on the flashing light board.
-
When the storage is done, the management board activates its buzzer and the two
-
color
DL7
LED
lights green.
LED DL7
on the flashing light board, flashes 3 times to confirm.
-
To exit from programming, wait 10 s or briefly press button
S1
on the control board.
Cap
Board
Batteries Type
C
LR14 / 1,5V
Flashing light
MASTER control board
Flashing light board
LEDS
MASTER control board
