La Toulousaine 7386, Installation Manual

Page: 2 / 25

This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. It may be modified at any time in accordance with product changes.
_N°7386 Installation_Totem operator (Sliding gate)
09/21 p.2
- Hammer drill
- Set of steel/concrete drill bits
- Electric screwdriver with end - pieces
- Allen keys + Flat wrenches
- Flat screwdriver 2,5 mm
- Wire stripper pliers
- Hammer/Chisel
- Spirit level
- Plumb bob
- Hacksaw
- Angle grinder
- Riveting pliers
- Tape measure
- Appropriate screws and
pins for the supports
- 10 mm shims
Required equipment ........................................................................................................ p.2
Installation instructions .................................................................................................... p.3
Electrical duct installation ................................................................................................ p.4
Asse installing the aluminum posts (Option) ...................................................... p.4
Check of existing posts ......................................................................................... p.5 to p.6
Guide rail attachment (on all types of posts) ................................................................... p.6
Totem operator installation (on all types of posts) ................................................. p.7 to p.8
Installing the gate (on all types of posts) ............................................................... p.8 to p.9
Finishing clips ............................................................................................................... p.10
Installing the opening stop ............................................................................................ p.10
Installing the closing stop (on aluminum posts) ............................................................. p.11
Installing the closing stop (on existing posts) ................................................................ p.11
Receiver box adjustment ............................................................................................... p.11
Setting the limit - switches ............................................................................................... p.12
Connection plan ............................................................................................................ p.13
DIPS switch factory settings .......................................................................................... p.13
IMPORTANT : Flashing amber light and cells installation ............................................ p.14
Outdoor antenna installation ......................................................................................... p.15
Self - learning .................................................................................................................. p.16
In case of a fault or before the self - learning cycle : Reset board ................................. p.17
Radio receiver :
- Transmitter programming .......................................................................................... p.17
- Wireless keypad programming .................................................................................. p.18
- Deleting a key from the transmitter ............................................................................ p.19
- Deleting a channel ..................................................................................................... p.19
- Memory wipe ............................................................................................................. p.19
Options :
- Connection : Pulse button ......................................................................................... p.20
- Connection : Partial open button ............................................................................... p.20
- Connection : External antenna .................................................................................. p.20
- Connection : Battery .................................................................................................. p.21
Breakdown assistance .................................................................................................. p.22
Description of LED flashing sequences ......................................................................... p.22
Appendix ............................................................................................................ p.23 à p.24
In the case of an openwork gate ................................................................................... p.25