This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. It may be modified at any time in accordance with product changes.
_N°7386
Installation_Totem operator (Sliding gate)
09/21
p.11
Screws FHC M8x20 + Drilled square
(supplied)
Closing stop
Stop support
Closing stop fastening
CHC screws M10 washer
(supplied)
Aluminum post
Receiving box
to be fixed with 2 screws
TH M8x25
+ M8 nuts + M8 washer
(supplied)
5 mm clearance
Front view
Installing the closing stop
(on aluminum posts)
Installing the closing stop
(on existing posts)
5 mm clearance
Closing stop
≈ 190
mm
Closing post
-
Close gate to closing post.
-
Position the closing stop on the post at the top
of the gate.
-
Secure it with pins and screws suitable for the
support (not provided).
Top view
Receiving box
Adjustment
screw
-
Adjust the receiving box in line with the gate using the 2 screws inside the closing stop.
Closing stop
Receiver box adjustment
