This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. It may be modified at any time in accordance with product changes.
_N°7386
Installation_Totem operator (Sliding gate)
09/21
p.14
1
-
Unscrew and remove the orange cover.
2
-
Unscrew and remove the board.
3
-
Place the batteries.
4
-
Screw the board and the orange cover back on.
5
-
Attach the flashing amber light assembly to the post.
Cover
Board
1
-
Install the batteries (the cell diode lights up for a few seconds and then turns off).
2
-
Insert the TX transmitter cell (green diode) and fix it.
3
-
Next, place the RX receiver cell (red diode) so that its LED lights up (cells aligned) and then fix it.
Please note :
If after a few minutes the RX cell goes into standby, reactivate it : Remove the battery
and then put it back in (or press the alarm button) and repeat step
3
.
Batteries Type
C
LR14 / 1,5V
Please note :
Wireless accessories are pre
-
programmed at the factory.
IMPORTANT :
Flashing amber light installation
Installing the cells
TX :
Transmitter cell
AA
batteries
1,5V / LR6
Green LED
Red LED
Alarm button
Management board
(wireless accessories)
LED status
Must switch off
On
RX :
Receiver cell
