This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. It may be modified at any time in accordance with product changes.
_N°7386
Installation_Totem operator (Sliding gate)
09/21
p.12
Comment :
If the cells are not installed, the wireless accessory management board will beep.
-
Fix the magnet on its support with the TF 4,2x25 auto screws (supplied).
Please note :
To adjust and fix the magnet support to the rack and pinion follow steps
2
and
3
.
-
Push the gate in the other direction (1) to position the right limit switch (2).
-
Set the magnet support (3) on the sensor to switch (red LED lights up).
-
Attach the magnet support to the rack and pinion with the 2 screws TF 4,2x16 (supplied).
3
Adjustment of the closing or opening limit
-
switch
(depending on the operator side)
:
-
Open or close the gate (1) to position the left limit switch (2).
-
Set the magnet support (3) on the sensor to switch (red LED lights up).
-
Attach the magnet support to the rack and pinion with the 2 screws TF 4,2x16 (supplied).
2
Setting the limit
-
switches
Unlocking the operator
Magnet
Support
Auto screw
TF 4,2x25
1
Sensor
Operator board
Sensor
Operator board
