EN
129
Display
Operating Procedure
Description
Programming Mode
“Technical” Programming
Group Dose
Settings
Flush Time
2,0 s
Flush Time
94.4 00:00
95.5 95.1 SB
1
When the espresso machine is turned on, press and hold the T3 button
to access the “Barista” programming.
After about 5 seconds the following screen is displayed.
Group Dose
Settings
2
Move between the parameters using the buttons
T1
or T2
until the display shows:
Flush Time
2,0 s
3
Press the T3 button
to enter the menu, navigate the parameters using the buttons
T1
and T2
to set the desired value.
• This parameter allows the operator to
adjust the delivery time of hot water to
wash the group.
• This parameter is activated by pressing
the button T3. A value equal to “0”
(zero) means a continuous delivery of
hot water.
THE COFFEE BOILER CONTAINS WATER AT ELEVATED TEMPERATURES.
WATER TEMPERATURE OVER 52°C CAN CAUSE SEVERE BURNS INSTANTLY OR DEATH FROM SCALDING.
WARNING
THE COFFEE BOILER CONTAINS WATER AT ELEVATED TEMPERATURES.
WATER TEMPERATURE OVER 52°C CAN CAUSE SEVERE BURNS INSTANTLY OR DEATH FROM SCALDING.
WARNING
Summary of Contents for kb90 Series
Page 143: ...EN 143...
Page 144: ......
