EN
63
Display
Operating Procedure
Description
Programming Mode
“Barista” Programming
Group Dose
Settings
Pre-Inf
Settings
Pre-Infusion or Pre-Brewing
• This parameter allows the operator to
program the time of pre-brewing of
water with the coffee. Each group can
have a different programming.
• Pre-brewing has only two values to be
adjusted for each group. The time (in
seconds) for which the brewing valve
is open during the pre-brewing cycle
and the time (in seconds) for which
the brewing valve is closed during the
pre-brewing cycle; during this time the
pump is active. Once the pre-brewing
cycle is over, the normal brewing cycle
will continue until the end.
• For an espresso machine composed
of three groups, they are identified as
Group 1, Group 2 and Group 3.
Pre-Inf Settings
Exit
5
Press
T1
or T2
until the display shows the exit menu, press the T3 button
to return to the
“Barista” programming.
6
Press
T1
or T2
to continue with the programming of the other parameters.
94.4 00:00
95.5 95.1 SB
7
Press T2
and T3
at the same time to exit the programming mode and return to the normal use of the
espresso machine.
Summary of Contents for kb90 Series
Page 143: ...EN 143...
Page 144: ......