EN
83
Display
Operating Procedure
Description
Programming Mode
“Technical” Programming
Enter Password
******
1
After accessing the “Technical” programming menu and entering the password, use the buttons
T1
and T2
until the following screen is displayed.
Group Dose
Settings
2
Press the button T1
or T2
to display the following menu.
G1 Dose
Settings
3
Press the T3 button
to start the doses programming procedure.
Group 1 Mode
PULSES
4
Press the T3 button
to access the menu, then navigate using
T1
and T2
to choose between
PULSES
,
MASS
and
BREWRATIO
, press the
T3 button
to confirm the option.
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed, the Selection
Indicator remains lighted.
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
• BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
Program Dose
Enter Password
******
G1 Dose
Settings
Summary of Contents for kb90 Series
Page 143: ...EN 143...
Page 144: ......
