EN
85
Display
Operating Procedure
Description
Programming Mode
“Technical” Programming
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each button on the
keyboard.
• The brewing amount can be set in terms
of time (sec. ) or pulses. This number
refers to the number of pulses that the
flowmeter sends to the CPU.
• Once programmed, the button remains
lighted.
• It is possible to set the dose for both a
short and a long shot on the same key.
• The setting of the first group is
automatically copied to the subsequent
groups.
• It is possible to set each key individually,
in this case the dose of the first group
will no longer be used.
• It is possible to copy the doses of any
key to the others.
Program Dose
Enter Password
******
G1 Dose
Settings
Group Dose
Exit
9
Press T1
or T2
to continue with the programming of the other parameters.
10
Press T1
or T2
to continue with the programming of the other parameters.
94.4 00:00
95.5 95.1 SB
11
Alternatively, you can exit the “Technical” programming and return to the normal use of the espresso machine
by pressing T2
and T3
at the same time.
Summary of Contents for kb90 Series
Page 143: ...EN 143...
Page 144: ......
